View Single Post
  #8  
Old 08-01-2011, 04:15 PM
flatinfifth flatinfifth is offline
Free Swimmer
 
Join Date: Nov 2007
Posts: 34
Rep Power: 53
flatinfifth is on a distinguished road
Default Re: Cables Breaking on Mirage Drive

Hi folks,

Been some time since I've been on the forum but your post really perked my interest. My brother Al and I have been fishing out of Hobies for the past three and a half years and have never had this happen. The only thing that I could possibly imagine that would lead to this cable breakage would be an overthightening of the cables. The instructions tell you how to tighten and how much to tighten. They should have a little compliance when tested with you fingers in a compressive motion. In other words, they should give a little when you squeeze them together. Anything tighter than this will place loads on the cable ends that most likely cause them to fail.

You won't need new cables at all if you keep them rinsed and lubed on a semi-regular basis. Other parts are bound to wear out before the cables ever break. My experience with Hobie has been first class from design to manufacture. Hope this helps.

Angel Figueras
Southwind Kayak Centers
Dobyns Rods
Hobie Fishing Team Member
Reply With Quote